PROXMOX : e1000e : Detected Hardware Unit Hang:

Reply to PROXMOX : e1000e : Detected Hardware Unit Hang: on Thu, 04 Sep 2025 10:31:56 GMT

FredR — Thu, 04 Sep 2025 10:31:56 GMT

J’ai supprimé les commandes hostpci :

# grep "hostpci" /etc/pve/qemu-server/*.conf
/etc/pve/qemu-server/100.conf:#hostpci0: 0000:01:00.0,rombar=0
/etc/pve/qemu-server/100.conf:#hostpci1: 0000:01:00.1,rombar=0

Et maintenant j’ai plus de suppression du drivers :

# networkctl | grep "enp"
systemd-networkd is not running, output might be incomplete.
  2 enp1s0f0        ether    -           unmanaged
  3 enp0s31f6       ether    -           unmanaged
  4 enp1s0f1        ether    -           unmanaged
# dmesg | grep "igb"
[    1.695998] igb: Intel(R) Gigabit Ethernet Network Driver
[    1.695999] igb: Copyright (c) 2007-2014 Intel Corporation.
[    1.696010] igb 0000:01:00.0: enabling device (0000 -> 0002)
[    1.878837] igb 0000:01:00.0: added PHC on eth0
[    1.878861] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
[    1.878862] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 90:e2:ba:08:85:50
[    1.879161] igb 0000:01:00.0: eth0: PBA No: G18758-003
[    1.879162] igb 0000:01:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[    1.879174] igb 0000:01:00.1: enabling device (0000 -> 0002)
[    2.061778] igb 0000:01:00.1: added PHC on eth2
[    2.061797] igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection
[    2.061798] igb 0000:01:00.1: eth2: (PCIe:2.5Gb/s:Width x4) 90:e2:ba:08:85:51
[    2.062101] igb 0000:01:00.1: eth2: PBA No: G18758-003
[    2.062102] igb 0000:01:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[    2.292065] igb 0000:01:00.1 enp1s0f1: renamed from eth2
[    2.292529] igb 0000:01:00.0 enp1s0f0: renamed from eth0
[    7.030374] igb 0000:01:00.0 enp1s0f0: entered allmulticast mode
[    7.030413] igb 0000:01:00.0 enp1s0f0: entered promiscuous mode
[    9.314164] igb 0000:01:00.0 enp1s0f0: igb: enp1s0f0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[  121.086711] igb 0000:01:00.0 enp1s0f0: igb: enp1s0f0 NIC Link is Down
[  155.491157] igb 0000:01:00.0 enp1s0f0: igb: enp1s0f0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX

Reply to PROXMOX : e1000e : Detected Hardware Unit Hang: on Thu, 04 Sep 2025 08:14:57 GMT

FredR — Thu, 04 Sep 2025 08:14:57 GMT

Modification dans interface :

# cat /etc/network/interfaces
# network interface settings; autogenerated
# Please do NOT modify this file directly, unless you know what
# you're doing.
#
# If you want to manage parts of the network configuration manually,
# please utilize the 'source' or 'source-directory' directives to do
# so.
# PVE will preserve these directives, but will NOT read its network
# configuration from sourced files, so do not attempt to move any of
# the PVE managed interfaces into external files!

auto lo
iface lo inet loopback

#iface enp0s31f6 inet manual
iface enp1s0f0 inet manual

auto vmbr0
iface vmbr0 inet static
        address 165.195.195.230
        gateway 165.195.194.2
#       bridge-ports enp0s31f6
        bridge-ports enp1s0f0
        bridge-stp off
        bridge-fd 0
        netwask 255.255.254.0
        network 165.195.194.0

source /etc/network/interfaces.d/*

Reply to PROXMOX : e1000e : Detected Hardware Unit Hang: on Thu, 04 Sep 2025 08:12:41 GMT

FredR — Thu, 04 Sep 2025 08:12:41 GMT

Logs du drivers igb :

# dmesg | grep igb
[    1.672891] igb: Intel(R) Gigabit Ethernet Network Driver
[    1.672893] igb: Copyright (c) 2007-2014 Intel Corporation.
[    1.672912] igb 0000:01:00.0: enabling device (0000 -> 0002)
[    1.859883] igb 0000:01:00.0: added PHC on eth0
[    1.859904] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
[    1.859905] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 90:e2:ba:08:85:50
[    1.860210] igb 0000:01:00.0: eth0: PBA No: G18758-003
[    1.860210] igb 0000:01:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[    1.860239] igb 0000:01:00.1: enabling device (0000 -> 0002)
[    2.044066] igb 0000:01:00.1: added PHC on eth2
[    2.044086] igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection
[    2.044087] igb 0000:01:00.1: eth2: (PCIe:2.5Gb/s:Width x4) 90:e2:ba:08:85:51
[    2.044390] igb 0000:01:00.1: eth2: PBA No: G18758-003
[    2.044390] igb 0000:01:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[    2.262364] igb 0000:01:00.0 enp1s0f0: renamed from eth0
[    2.262415] igb 0000:01:00.1 enp1s0f1: renamed from eth2
[   10.866711] igb 0000:01:00.0: removed PHC on enp1s0f0
[   11.104104] igb 0000:01:00.1: removed PHC on enp1s0f1
[62458.082304] igb: Unknown symbol dca_remove_requester (err -2)
[62458.082529] igb: Unknown symbol dca_add_requester (err -2)
[62458.082627] igb: Unknown symbol dca_unregister_notify (err -2)
[62458.082648] igb: Unknown symbol dca_register_notify (err -2)
[62458.082676] igb: Unknown symbol dca3_get_tag (err -2)
[62499.011729] igb: Intel(R) Gigabit Ethernet Network Driver
[62499.011732] igb: Copyright (c) 2007-2014 Intel Corporation.

Reply to PROXMOX : e1000e : Detected Hardware Unit Hang: on Wed, 03 Sep 2025 19:57:07 GMT

FredR — Wed, 03 Sep 2025 19:57:07 GMT

L’erreur est nouvelle :

# journalctl | grep "Detected Hardware Unit Hang" | cut -c1-6|uniq -c
Journal file /var/log/journal/99b0a514478f45a993f76cd1a02892ef/system@000622d8a1539478-fcd8335a7d591443.journal~ is truncated, ignoring file.

      5 Oct 25
      4 Dec 03
      5 Jan 09
      4 Jan 15
      5 Jan 21
      4 Feb 18
      8 Mar 19
   1973 Jul 01
   1933 Jul 30
    683 Aug 05
  14250 Aug 14
  43200 Aug 15
  43200 Aug 16
  43200 Aug 17
  43200 Aug 18
  43200 Aug 19
  43200 Aug 20
  43200 Aug 21
  43200 Aug 22
  43200 Aug 23
  43200 Aug 24
  43200 Aug 25
  23272 Aug 26