Installation llama.cpp sous Windows 11 avec Ubuntu 22
-
Le PC en question :
# inxi -F System: Host: pcremi Kernel: 6.18.33.1-microsoft-standard-WSL2 arch: x86_64 bits: 64 Console: pty pts/2 Distro: Ubuntu 24.04.4 LTS (Noble Numbat) Machine: Message: No machine data: try newer kernel. Is dmidecode installed? Try -M --dmidecode. CPU: Info: 6-core model: AMD Ryzen 5 7500X3D bits: 64 type: MT MCP cache: L2: 6 MiB Speed (MHz): avg: 3992 min/max: N/A cores: 1: 3992 2: 3992 3: 3992 4: 3992 5: 3992 6: 3992 7: 3992 8: 3992 9: 3992 10: 3992 11: 3992 12: 3992 Graphics: Device-1: Microsoft Basic Render Driver driver: dxgkrnl v: 2.0.3 Device-2: Microsoft Basic Render Driver driver: dxgkrnl v: 2.0.3 Display: server: X.Org v: 24.1.6 driver: dri: swrast gpu: dxgkrnl,dxgkrnl resolution: 3840x2160~60Hz API: EGL v: 1.5 drivers: swrast platforms: wayland,x11,surfaceless,device API: OpenGL v: 4.6 vendor: microsoft mesa v: 24.0.9-0ubuntu0.3 renderer: D3D12 (AMD Radeon RX 9060 XT) Audio: Message: No device data found. Network: Message: No PCI device data found. IF-ID-1: eth0 state: up speed: 10000 Mbps duplex: full mac: Drives: Local Storage: total: 1 TiB used: 1.93 GiB (0.2%) ID-1: /dev/sda model: Virtual Disk size: 356.9 MiB ID-2: /dev/sdb model: Virtual Disk size: 159.5 MiB ID-3: /dev/sdc model: Virtual Disk size: 4 GiB ID-4: /dev/sdd model: Virtual Disk size: 1024 GiB Partition: ID-1: / size: 1006.85 GiB used: 1.93 GiB (0.2%) fs: ext4 dev: /dev/sdd Swap: ID-1: swap-1 type: partition size: 4 GiB used: 0 KiB (0.0%) dev: /dev/sdc Sensors: Src: lm-sensors+/sys Message: No sensor data found using /sys/class/hwmon or lm-sensors. Info: Memory: total: 16 GiB note: est. available: 15.2 GiB used: 775.9 MiB (5.0%) Processes: 30 Uptime: 5m Shell: Bash inxi: 3.3.34 -
Liste des commandes pour l’installation :
apt install cmake build-essential git curl https://raw.githubusercontent.com/creationix/nvm/master/install.sh | bash source ~/.profile nvm install node nvm install 24 nvm use 24 git clone https://github.com/ggml-org/llama.cpp.git cd llama.cpp/ mkdir build cd build cmake .. cmake --build . --config Release make install ldconfig -v `` -
Test du modèle : qwen2 1.5B Q4_K
# curl -L --fail -o /models/qwen2.5-1.5b-instruct-q4_k_m.gguf https://huggingface.co/bartowski/Qwen2.5-1.5B-Instruct-GGUF/resolve/main/Qwen2.5-1.5B-Instruct-Q4_K_M.gguf % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 1044 100 1044 0 0 5494 0 --:--:-- --:--:-- --:--:-- 5523 100 940M 100 940M 0 0 44.7M 0 0:00:20 0:00:20 --:--:-- 51.6M # llama-bench -m /models/qwen2.5-1.5b-instruct-q4_k_m.gguf | model | size | params | backend | threads | test | t/s | | ------------------------------ | ---------: | ---------: | ---------- | ------: | --------------: | -------------------: | | qwen2 1.5B Q4_K - Medium | 934.69 MiB | 1.54 B | CPU | 6 | pp512 | 247.59 ± 3.57 | | qwen2 1.5B Q4_K - Medium | 934.69 MiB | 1.54 B | CPU | 6 | tg128 | 53.42 ± 11.59 | build: 721354fbd (9761) -
Lancement du soft :
# llama-server -m /models/qwen2.5-1.5b-instruct-q4_k_m.gguf --host 0.0.0.0 --port 8080 -
Test du modèle : Qwen3.6-27B-Q4_K_M.gguf
# curl -L --fail -o /models/Qwen3.6-27B-Q4_K_M.gguf https://huggingface.co/unsloth/Qwen3.6-27B-MTP-GGUF/resolve/main/Qwen3.6-27B-Q4_K_M.gguf?download=true -
-
Vulkan :
# vulkaninfo | grep -i "deviceName" WARNING: [Loader Message] Code 0 : terminator_CreateInstance: Received return code -3 from call to vkCreateInstance in ICD /usr/lib/x86_64-linux-gnu/libvulkan_virtio.so. Skipping this driver. deviceName = llvmpipe (LLVM 17.0.6, 256 bits) -
Chargement d’un nouveau modèle :
curl -L -o mistral.gguf \ https://huggingface.co/TheBloke/Mistral-7B-Instruct-v0.2-GGUF/resolve/main/mistral-7b-instruct-v0.2.Q4_K_M.gguf -
-
Il faut installer Rocm : https://github.com/ROCm/rocm
Voir : https://rocm.docs.amd.com/projects/install-on-linux/en/latest/install/quick-start.html
Pour Ubuntu 24 :
wget https://repo.radeon.com/amdgpu-install/7.2.4/ubuntu/noble/amdgpu-install_7.2.4.70204-1_all.deb sudo apt install ./amdgpu-install_7.2.4.70204-1_all.deb sudo apt update sudo apt install "linux-headers-$(uname -r)" "linux-modules-extra-$(uname -r)" sudo apt install amdgpu-dkms sudo apt install python3-setuptools python3-wheel sudo usermod -a -G render,video $LOGNAME sudo apt install rocm -
Visiblement c’est pas top sur WSL2 :
-
-
Aie …
# amdgpu-install --usecase=rocm,graphics --gfxversion=all INFO: Using generic amdrocm packages (--gfxversion=all) INFO: i386 architecture has not been enabled with dpkg. Installation of 32-bit run time has been excluded. Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libegl1-amdgpu-mesa : Depends: libwayland-client0 (>= 1.24.0) but 1.22.0-2.1build1 is to be installed mesa-amdgpu-libgallium : Depends: libc6 (>= 2.43) but 2.39-0ubuntu8.8 is to be installed E: Unable to correct problems, you have held broken packages -
Je vais faire :
# amdgpu-install --usecase=rocm,opencl --no-dkms -
Aie …
# rocminfo WSL environment detected. Cannot load librocdxg.so, failed:librocdxg.so: cannot open shared object file: No such file or directory GetExportAddress failed: /opt/rocm-7.2.4/core-7.14/bin/../lib/libhsa-runtime64.so.1: undefined symbol: hsaKmtOpenKFD hsa_init Failed, possibly no supported GPU devices -
Compilation :
# git clone https://github.com/ROCm/librocdxg # cd librocdxg # export win_sdk='/mnt/c/Program Files (x86)/Windows Kits/10/Include/10.0.26100.0' # mkdir -p build # cd build # cmake .. -DWIN_SDK="${win_sdk}/shared" # make # sudo make installErreur :
# make [ 3%] Building CXX object shared/CMakeFiles/dxg_shared.dir/src/dxcore_loader.cpp.o In file included from /home/remia/librocdxg/shared/../shared/include/dxcore_loader.h:26, from /home/remia/librocdxg/shared/src/dxcore_loader.cpp:5: /home/remia/librocdxg/shared/../shared/include/d3dkmt_types.h:47:10: fatal error: ntstatus.h: No such file or directory 47 | #include <ntstatus.h> | ^~~~~~~~~~~~ compilation terminated. make[2]: *** [shared/CMakeFiles/dxg_shared.dir/build.make:76: shared/CMakeFiles/dxg_shared.dir/src/dxcore_loader.cpp.o] Error 1 make[1]: *** [CMakeFiles/Makefile2:126: shared/CMakeFiles/dxg_shared.dir/all] Error 2 make: *** [Makefile:156: all] Error 2 -
Installation de Visual Studio : https://visualstudio.microsoft.com/ .
Installation du Windows SDK : https://learn.microsoft.com/fr-fr/windows/apps/windows-sdk/J’ai donc fait un nouvel export :
# export win_sdk=/mnt/c/Program\ Files\ \(x86\)/Windows\ Kits/10/Include/10.0.28000.0/ -
C’est bon rocminfo fonctionne :
# rocminfo WSL environment detected. ===================== HSA System Attributes ===================== Runtime Version: 1.21 Runtime Ext Version: 1.26 System Timestamp Freq.: 1000.000000MHz Sig. Max Wait Duration: 18446744073709551615 (0xFFFFFFFFFFFFFFFF) (timestamp count) Machine Model: LARGE System Endianness: LITTLE Mwaitx: DISABLED XNACK enabled: NO DMAbuf Support: YES VMM Support: YES Fabric Support: NO ========== HSA Agents ========== ******* Agent 1 ******* Name: AMD Ryzen 5 7500X3D 6-Core Processor Uuid: CPU-XX Marketing Name: AMD Ryzen 5 7500X3D 6-Core Processor Vendor Name: CPU Feature: None specified Profile: FULL_PROFILE Float Round Mode: NEAR Max Queue Number: 0(0x0) Queue Min Size: 0(0x0) Queue Max Size: 0(0x0) Queue Type: MULTI Node: 0 Device Type: CPU Cache Info: L1: 32768(0x8000) KB Chip ID: 0(0x0) Cacheline Size: 64(0x40) BDFID: 0 Internal Node ID: 0 Compute Unit: 12 SIMDs per CU: 0 Shader Engines: 0 Shader Arrs. per Eng.: 0 Memory Properties: Features: None Pool Info: Pool 1 Segment: GLOBAL; FLAGS: FINE GRAINED Size: 15940236(0xf33a8c) KB Allocatable: TRUE Alloc Granule: 4KB Alloc Recommended Granule:4KB Alloc Alignment: 4KB Accessible by all: TRUE Pool 2 Segment: GLOBAL; FLAGS: EXTENDED FINE GRAINED Size: 15940236(0xf33a8c) KB Allocatable: TRUE Alloc Granule: 4KB Alloc Recommended Granule:4KB Alloc Alignment: 4KB Accessible by all: TRUE Pool 3 Segment: GLOBAL; FLAGS: KERNARG, FINE GRAINED Size: 15940236(0xf33a8c) KB Allocatable: TRUE Alloc Granule: 4KB Alloc Recommended Granule:4KB Alloc Alignment: 4KB Accessible by all: TRUE Pool 4 Segment: GLOBAL; FLAGS: COARSE GRAINED Size: 15940236(0xf33a8c) KB Allocatable: TRUE Alloc Granule: 4KB Alloc Recommended Granule:4KB Alloc Alignment: 4KB Accessible by all: TRUE ISA Info: ******* Agent 2 ******* Name: gfx1200 Uuid: GPU-a7d3e620dff8c443 Marketing Name: AMD Radeon RX 9060 XT Vendor Name: AMD Feature: KERNEL_DISPATCH Profile: BASE_PROFILE Float Round Mode: NEAR Max Queue Number: 128(0x80) Queue Min Size: 64(0x40) Queue Max Size: 131072(0x20000) Queue Type: MULTI Node: 1 Device Type: GPU Cache Info: L1: 32(0x20) KB L3: 32768(0x8000) KB Chip ID: 30096(0x7590) Cacheline Size: 64(0x40) Max Clock Freq. (MHz): 2620 BDFID: 768 Internal Node ID: 1 Compute Unit: 32 SIMDs per CU: 2 Shader Engines: 2 Shader Arrs. per Eng.: 2 Coherent Host Access: FALSE Memory Properties: Features: KERNEL_DISPATCH Fast F16 Operation: TRUE Wavefront Size: 32(0x20) Workgroup Max Size: 1024(0x400) Workgroup Max Size per Dimension: x 1024(0x400) y 1024(0x400) z 1024(0x400) Max Waves Per CU: 32(0x20) Max Work-item Per CU: 1024(0x400) Grid Max Size: 4294967295(0xffffffff) Grid Max Size per Dimension: x 4294967295(0xffffffff) y 65535(0xffff) z 65535(0xffff) Max fbarriers/Workgrp: 32 Packet Processor uCode:: 68 SDMA engine uCode:: 0 IOMMU Support:: None Pool Info: Pool 1 Segment: GLOBAL; FLAGS: COARSE GRAINED Size: 16695296(0xfec000) KB Allocatable: TRUE Alloc Granule: 4KB Alloc Recommended Granule:2048KB Alloc Alignment: 4KB Accessible by all: FALSE Pool 2 Segment: GROUP Size: 64(0x40) KB Allocatable: FALSE Alloc Granule: 0KB Alloc Recommended Granule:0KB Alloc Alignment: 0KB Accessible by all: FALSE ISA Info: ISA 1 Name: amdgcn-amd-amdhsa--gfx1200 Machine Models: HSA_MACHINE_MODEL_LARGE Profiles: HSA_PROFILE_BASE Default Rounding Mode: NEAR Default Rounding Mode: NEAR Fast f16: TRUE Workgroup Max Size: 1024(0x400) Workgroup Max Size per Dimension: x 1024(0x400) y 1024(0x400) z 1024(0x400) Grid Max Size: 4294967295(0xffffffff) Grid Max Size per Dimension: x 2147483647(0x7fffffff) y 65535(0xffff) z 65535(0xffff) FBarrier Max Size: 32 ISA 2 Name: amdgcn-amd-amdhsa--gfx12-generic Machine Models: HSA_MACHINE_MODEL_LARGE Profiles: HSA_PROFILE_BASE Default Rounding Mode: NEAR Default Rounding Mode: NEAR Fast f16: TRUE Workgroup Max Size: 1024(0x400) Workgroup Max Size per Dimension: x 1024(0x400) y 1024(0x400) z 1024(0x400) Grid Max Size: 4294967295(0xffffffff) Grid Max Size per Dimension: x 2147483647(0x7fffffff) y 65535(0xffff) z 65535(0xffff) FBarrier Max Size: 32 *** Done *** -
Pas possible de faire le build :
# cmake .. -G Ninja -DCMAKE_C_COMPILER=/opt/rocm/llvm/bin/clang -DCMAKE_CXX_COMPILER=/opt/rocm/llvm/bin/clang++ -DCMAKE_CXX_FLAGS="-I/opt/rocm/include" -DCMAKE_CROSSCOMPILING=ON -DCMAKE_BUILD_TYPE=Release -DGPU_TARGETS="gfx1151" -DBUILD_SHARED_LIBS=ON -DLLAMA_BUILD_TESTS=OFF -DGGML_HIP=ON -DGGML_OPENMP=OFF -DGGML_CUDA_FORCE_CUBLAS=OFF -DGGML_HIP_ROCWMMA_FATTN=OFF -DLLAMA_CURL=OFF -DGGML_NATIVE=OFF -DGGML_STATIC=OFF -DCMAKE_SYSTEM_NAME=Linux -DCMAKE_HIP_COMPILER_ROCM_ROOT=/opt/rocm-7.2.4/core-7.14 -DCMAKE_PREFIX_PATH=/opt/rocm-7.2.4/core-7.14 CMAKE_BUILD_TYPE=Release -- Setting GGML_NATIVE_DEFAULT to OFF -- Warning: ccache not found - consider installing it for faster compilation or disable this warning with GGML_CCACHE=OFF -- CMAKE_SYSTEM_PROCESSOR: -- GGML_SYSTEM_ARCH: UNKNOWN -- Including CPU backend CMake Warning at ggml/src/ggml-cpu/CMakeLists.txt:570 (message): Unknown CPU architecture. Falling back to generic implementations. Call Stack (most recent call first): ggml/src/CMakeLists.txt:470 (ggml_add_cpu_backend_variant_impl) -- Adding CPU backend variant ggml-cpu: -DGGML_CPU_GENERIC -- The HIP compiler identification is unknown CMake Error at /usr/share/cmake-3.28/Modules/CMakeDetermineHIPCompiler.cmake:217 (message): The ROCm root directory: /opt/rocm-7.2.4/core-7.14 does not contain the HIP runtime CMake package, expected at one of: /opt/rocm-7.2.4/core-7.14/lib/cmake/hip-lang/hip-lang-config.cmake /opt/rocm-7.2.4/core-7.14/lib64/cmake/hip-lang/hip-lang-config.cmake Call Stack (most recent call first): ggml/src/ggml-hip/CMakeLists.txt:43 (enable_language) -- Configuring incomplete, errors occurred! -
Aie …
# /opt/rocm/bin/hipconfig --full Warning: HIP version file: "/opt/rocm-7.2.4/core-7.14/hip/share/hip/version" not found. Cannot give HIP version information. Warning: HIP version file: "/opt/rocm-7.2.4/core-7.14/hip/share/hip/version" not found. Cannot give HIP version information. HIP version: ==hipconfig HIP_PATH :/opt/rocm-7.2.4/core-7.14/hip ROCM_PATH :/opt/rocm-7.2.4/core-7.14 HIP_COMPILER :clang HIP_PLATFORM :amd HIP_RUNTIME :rocclr CPP_CONFIG : -D__HIP_PLATFORM_HCC__= -D__HIP_PLATFORM_AMD__= -I/opt/rocm-7.2.4/core-7.14/hip/include -I/include ==hip-clang HIP_CLANG_PATH :/opt/rocm-7.2.4/core-7.14/lib/llvm/bin AMD clang version 23.0.0git (https://github.com/ROCm/llvm-project.git 46fcb339fb61119b337f973c7ca9e710a319fdd0+PATCHED:440716f8b87be9d8e20ed910e10e5b6d14d57cf6) Target: x86_64-unknown-linux-gnu Thread model: posix InstalledDir: /opt/rocm-7.2.4/core-7.14/lib/llvm/bin sh: 1: /opt/rocm-7.2.4/core-7.14/lib/llvm/bin/llc: not found hip-clang-cxxflags : sh: 1: /opt/rocm-7.2.4/core-7.14/hip/bin/hipcc: not found hip-clang-ldflags : sh: 1: /opt/rocm-7.2.4/core-7.14/hip/bin/hipcc: not found == Environment Variables PATH =/opt/vulkan-sdk/x86_64/bin:/root/.nvm/versions/node/v26.3.1/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin LD_LIBRARY_PATH=/opt/vulkan-sdk/x86_64/lib/VulkanLoader/lib HIP_PATH=/opt/rocm-7.2.4/core-7.14/hip == Linux Kernel Hostname : pcremi Linux pcremi 6.18.33.1-microsoft-standard-WSL2 #1 SMP PREEMPT_DYNAMIC Fri Jun 5 01:12:21 UTC 2026 x86_64 x86_64 x86_64 GNU/Linux No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 24.04.4 LTS Release: 24.04 Codename: noble
Bonjour ! Vous semblez intéressé par cette conversation, mais vous n’avez pas encore de compte.
Marre de refaire défiler les mêmes messages ? Créez un compte pour retrouver votre position, recevoir des notifications des nouvelles réponses, sauvegarder vos favoris et voter pour les messages que vous appréciez.
Grâce à votre participation, ce message peut devenir encore meilleur 💗
S'inscrire Se connecter