Crash de Ubuntu quand on lance le WIFI ( MacBook Air )
-
Voir : https://forums.linuxmint.com/viewtopic.php?t=454647 :
# lspci -nnk | grep -iA3 net 02:00.0 Network controller [0280]: Broadcom Inc. and subsidiaries BCM43224 802.11a/b/g/n [14e4:4353] (rev 01) Subsystem: Apple Inc. AirPort Extreme [106b:00e9] Kernel driver in use: wl Kernel modules: bcma, wl -
Dans /etc/default/grub
GRUB_DEFAULT=0 GRUB_TIMEOUT_STYLE=hidden GRUB_TIMEOUT=0 GRUB_DISTRIBUTOR=`( . /etc/os-release; echo ${NAME:-Ubuntu} ) 2>/dev/null || echo Ubuntu` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi=off" GRUB_CMDLINE_LINUX=""et après :
sudo update-grub -
Dans /etc/default/grub
GRUB_DEFAULT=0 GRUB_TIMEOUT_STYLE=hidden GRUB_TIMEOUT=0 GRUB_DISTRIBUTOR=`( . /etc/os-release; echo ${NAME:-Ubuntu} ) 2>/dev/null || echo Ubuntu` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi=off" GRUB_CMDLINE_LINUX=""et après :
sudo update-grub@Kali a dit dans Crash de Ubuntu quand on lance le WIFI ( MacBook Air ) :
acpi=off
Crash après la mise en place de acpi=off , incompréhensible.
-
J’ai pas lancé la commande :
$ ubuntu-drivers devices
c’est mieux que lspci -vvvIl faut aussi essayer “noapic” à la place de acpi=off .
Il faut essayer “nomodeset” à la place de acpi=off .
-
J’ai pas lancé la commande :
$ rfkill list all -
Pour le menu recovery il faut appuyer une fois sur ESC ou ALT.
noapic + nomodeset => Blocage.
noapic => Blocage. ( Boot long car DISABLE IRQ 11 ).C’est pas gagné.
-
Audit :
# lshw -C network *-network description: Network controller product: BCM43224 802.11a/b/g/n vendor: Broadcom Inc. and subsidiaries physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=bcma-pci-bridge latency=0 resources: irq:17 memory:a0400000-a0403fff *-network description: Ethernet interface physical id: 6 bus info: usb@2:1.3 logical name: enx9cebe8ed414c serial: 9c:eb:e8:ed:41:4c size: 1Gbit/s capacity: 1Gbit/s capabilities: ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8152 driverversion=v1.12.13 duplex=full firmware=rtl8153a-3 v2 02/07/20 ip=10.3.2.69 link=yes multicast=yes port=MII speed=1Gbit/sAvec lspci :
02:00.0 Network controller: Broadcom Inc. and subsidiaries BCM43224 802.11a/b/g/n (rev 01) Subsystem: Apple Inc. AirPort Extreme Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0, Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at a0400000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME- Capabilities: [58] Vendor Specific Information: Len=78 <?> Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [d0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 10W DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+ RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <4us, L1 <64us ClockPM+ Surprise- LLActRep+ BwNot- ASPMOptComp- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes, Disabled- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1 TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ AERCap: First Error Pointer: 14, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Capabilities: [13c v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Capabilities: [160 v1] Device Serial Number fa-4a-f3-ff-ff-88-10-40 Capabilities: [16c v1] Power Budgeting <?> Kernel driver in use: bcma-pci-bridge Kernel modules: bcmaDrivers est UP :
# lsmod | grep bcma bcma 86016 0 # modinfo bcma filename: /lib/modules/6.14.0-35-generic/kernel/drivers/bcma/bcma.ko.zst license: GPL description: Broadcom's specific AMBA driver srcversion: 3DE20B36E9EAD3169CDBC6F -
Tentative de réinstallation :
# ubuntu-drivers devices udevadm hwdb is deprecated. Use systemd-hwdb instead. == /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0 == modalias : pci:v000014E4d00004353sv0000106Bsd000000E9bc02sc80i00 vendor : Broadcom Inc. and subsidiaries model : BCM43224 802.11a/b/g/n (AirPort Extreme) driver : broadcom-sta-dkms - third-party free # apt-get install broadcom-sta-dkms Reading package lists... Done Building dependency tree... Done Reading state information... Done broadcom-sta-dkms is already the newest version (6.30.223.271-23ubuntu1.2). 0 upgraded, 0 newly installed, 0 to remove and 9 not upgraded. -
Rien dans rfkill :
# rfkill unblock wifi # rfkill list 0: hci0: Bluetooth Soft blocked: no Hard blocked: no -
Pas un problème de chargement de driver :
# modprobe -r iwlwifi # modprobe iwlwifi # nmcli device DEVICE TYPE STATE CONNECTION enx9cebe8ed414c ethernet connected Wired connection 1 lo loopback connected (externally) lo # modprobe -r bcma # modprobe bcma # nmcli device DEVICE TYPE STATE CONNECTION enx9cebe8ed414c ethernet connected Wired connection 1 lo loopback connected (externally) lo -
Grub :
GRUB_DEFAULT=0 GRUB_TIMEOUT_STYLE=hidden GRUB_TIMEOUT=0 GRUB_DISTRIBUTOR=`( . /etc/os-release; echo ${NAME:-Ubuntu} ) 2>/dev/null || echo Ubuntu` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset pci=noaer" GRUB_CMDLINE_LINUX="" -
J’ai l’impression que le crash est après :
[ 11.505875] kernel: hdaudio hdaudioC0D3: Unable to configure, disabling [ 11.506648] kernel: input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 12.600422] kernel: r8152 3-1.3:1.0 enx9cebe8ed414c: carrier onQuand cela fonctionne il y a deux drivers : bcma, wl
02:00.0 Network controller: Broadcom Inc. and subsidiaries BCM43224 802.11a/b/g/n (rev 01) Subsystem: Apple Inc. AirPort Extreme Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at a0400000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME- Capabilities: [58] Vendor Specific Information: Len=78 <?> Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [d0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 10W DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+ RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <4us, L1 <64us ClockPM+ Surprise- LLActRep+ BwNot- ASPMOptComp- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes, Disabled- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1 TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ AERCap: First Error Pointer: 14, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Capabilities: [13c v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Capabilities: [160 v1] Device Serial Number fa-4a-f3-ff-ff-88-10-40 Capabilities: [16c v1] Power Budgeting <?> Kernel driver in use: wl Kernel modules: bcma, wl -
J’ai ajouté un fichier … je vais tester :
# cat /etc/modules-load.d/wifi.conf bcma wl -
Cela semble fonctionner après 3 reboot.
Bonjour ! Vous semblez intéressé par cette conversation, mais vous n’avez pas encore de compte.
Marre de refaire défiler les mêmes messages ? Créez un compte pour retrouver votre position, recevoir des notifications des nouvelles réponses, sauvegarder vos favoris et voter pour les messages que vous appréciez.
Grâce à votre participation, ce message peut devenir encore meilleur 💗
S'inscrire Se connecter