NodeBB

oui pour la video. Comme ça quand on allume elle se lance en boucle

il faut mettre la commande dans quel fichier pour que ça démarre immédiatement au boot stp ?
et en boucle

ça a l’air mieux comme ça !

Je relance

pi@raspberrypiFlipper:~ $ ffmpeg -i LW3Org.mp4 -filter:v scale=480:-1 -c:a copy LW3Org-out.mp4 -an

@farias a dit dans MAJ Raspberry PI Zero W :

ffmpeg -i LW3Org.mp4 -filter:v scale=480:-1 -c:a copy LW3Org-out.mp4

J’ai lancé la commade… mais je pense que ça va prendre du temps lol…
ffmpeg utilise 97% de CPU lol

c’est déjà installé

pi@raspberrypiFlipper:~ $ sudo exiftool LW3Org.mp4
ExifTool Version Number         : 12.57
File Name                       : LW3Org.mp4
Directory                       : .
File Size                       : 12 MB
File Modification Date/Time     : 2024:08:09 16:47:29+02:00
File Access Date/Time           : 2024:08:09 16:47:29+02:00
File Inode Change Date/Time     : 2025:08:29 09:12:31+02:00
File Permissions                : -rw-r--r--
File Type                       : MP4
File Type Extension             : mp4
MIME Type                       : video/mp4
Major Brand                     : MP4 v2 [ISO 14496-14]
Minor Version                   : 0.0.0
Compatible Brands               : isom, mp42
Movie Header Version            : 0
Create Date                     : 2018:11:21 02:24:27
Modify Date                     : 2018:11:21 02:24:27
Time Scale                      : 30000
Duration                        : 0:03:56
Preferred Rate                  : 1
Preferred Volume                : 100.00%
Preview Time                    : 0 s
Preview Duration                : 0 s
Poster Time                     : 0 s
Selection Time                  : 0 s
Selection Duration              : 0 s
Current Time                    : 0 s
Next Track ID                   : 3
Track Header Version            : 0
Track Create Date               : 2018:11:21 02:24:27
Track Modify Date               : 2018:11:21 02:24:27
Track ID                        : 1
Track Duration                  : 0:03:56
Track Layer                     : 0
Track Volume                    : 0.00%
Image Width                     : 640
Image Height                    : 360
Compressor ID                   : avc1
Source Image Width              : 640
Source Image Height             : 360
X Resolution                    : 72
Y Resolution                    : 72
Bit Depth                       : 24
Video Frame Rate                : 29.97
Graphics Mode                   : srcCopy
Op Color                        : 0 0 0
Matrix Structure                : 1 0 0 0 1 0 0 0 1
Media Header Version            : 0
Media Create Date               : 2018:11:21 02:24:27
Media Modify Date               : 2018:11:21 02:24:27
Media Time Scale                : 44100
Media Duration                  : 0:03:56
Media Language Code             : und
Handler Description             : ISO Media file produced by Google Inc. Created on: 11/20/2018.
Audio Format                    : mp4a
Audio Channels                  : 2
Audio Bits Per Sample           : 16
Audio Sample Rate               : 22050
Balance                         : 0
Handler Type                    : Metadata
Handler Vendor ID               : Apple
Google Start Time               : 0
Google Track Duration           : 0:03:56
Media Data Size                 : 12226838
Media Data Offset               : 100420
Image Size                      : 640x360
Megapixels                      : 0.230
Avg Bitrate                     : 414 kbps
Rotation                        : 0
pi@raspberrypiFlipper:~ $

mplayer utilise 92% CPU

la vidéo passe un peu ralentie…

PERFECT !!! MERCIIII !!!

@farias a dit dans MAJ Raspberry PI Zero W :

cat /etc/lightdm/lightdm.conf | grep -v “^#”

pi@raspberrypiFlipper:~ $ cat /etc/lightdm/lightdm.conf | grep -v "^#"
[LightDM]

[Seat:*]
greeter-session=pi-greeter
greeter-hide-users=false
user-session=LXDE-pi-x
display-setup-script=/usr/share/dispsetup.sh
autologin-user=pi
autologin-session=LXDE-pi-x

[XDMCPServer]

[VNCServer]
pi@raspberrypiFlipper:~ $

@farias

pi@raspberrypiFlipper:~ $ sudo apt-get install unclutter
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following packages were automatically installed and are no longer required:
  agnostics autotouch cups-pk-helper dconf-cli device-tree-compiler dos2unix feedbackd feedbackd-common fio flashrom fonts-gfs-didot-classic fonts-piboto gir1.2-notify-0.7 gir1.2-secret-1
  grim gtk-nop gtk2-engines-pixbuf gtk2-engines-pixflat gui-pkinst gui-updater ibverbs-providers iw labwc-prompt libaio1 libbasicusageenvironment1 libboost-iostreams1.74.0 libcupsimage2
  libfdt1 libfeedback-0.0-0 libgfapi0 libgfrpc0 libgfxdr0 libglusterfs0 libgpiolib0 libgroupsock8 libgsound0 libibverbs1 libliftoff-rpi liblivemedia77 libnbd0 libnuma1 librados2 librbd1
  librdmacm1 libwf-config1 libwf-utils0 libwlroots11 lxplug-batt lxplug-bluetooth lxplug-cpu lxplug-cputemp lxplug-ejecter lxplug-magnifier lxplug-menu lxplug-netman lxplug-volumepulse
  mate-polkit-bin pastebinit pi-greeter pi-language-support pi-printer-support pipanel pixflat-icons pixflat-theme printer-driver-escpr python3-cairo python3-cups python3-cupshelpers
  python3-pycryptodome python3-smbc python3-v4l2 qt5-gtk2-platformtheme qt5-style-plugin-cleanlooks qt5-style-plugin-motif qt5-style-plugin-plastique qt5-style-plugins qt5ct raspi-utils-core
  raspi-utils-eeprom raspi-utils-otp rp-bookshelf rpd-wallpaper rpinters swaylock system-config-printer-common system-config-printer-udev triggerhappy wayfire wfplug-batt wlopm xmlstarlet
  xsettingsd
Use 'sudo apt autoremove' to remove them.
The following additional packages will be installed:
  unclutter-startup
The following NEW packages will be installed:
  unclutter unclutter-startup
0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 24.0 kB of archives.
After this operation, 63.5 kB of additional disk space will be used.
Do you want to continue? [Y/n] Y
Get:1 http://distrib-coffee.ipsl.jussieu.fr/pub/linux/raspbian/raspbian bookworm/main armhf unclutter armhf 8-25 [15.2 kB]
Get:2 http://mirrors.ircam.fr/pub/raspbian/raspbian bookworm/main armhf unclutter-startup all 8-25 [8,860 B]
Fetched 24.0 kB in 1s (22.4 kB/s)
Preconfiguring packages ...
Selecting previously unselected package unclutter.
(Reading database ... 168822 files and directories currently installed.)
Preparing to unpack .../unclutter_8-25_armhf.deb ...
Unpacking unclutter (8-25) ...
Selecting previously unselected package unclutter-startup.
Preparing to unpack .../unclutter-startup_8-25_all.deb ...
Unpacking unclutter-startup (8-25) ...
Setting up unclutter (8-25) ...
update-alternatives: using /usr/bin/unclutter-classic to provide /usr/bin/unclutter (unclutter) in auto mode
Setting up unclutter-startup (8-25) ...
Processing triggers for man-db (2.11.2-2) ...
pi@raspberrypiFlipper:~ $ unclutter -idle 0
unclutter: could not open display
pi@raspberrypiFlipper:~ $

@farias

pi@raspberrypiFlipper:~ $ more /etc/lightdm/lightdm.conf
#
# General configuration
#
# start-default-seat = True to always start one seat if none are defined in the configuration
# greeter-user = User to run greeter as
# minimum-display-number = Minimum display number to use for X servers
# minimum-vt = First VT to run displays on
# lock-memory = True to prevent memory from being paged to disk
# user-authority-in-system-dir = True if session authority should be in the system location
# guest-account-script = Script to be run to setup guest account
# logind-check-graphical = True to on start seats that are marked as graphical by logind
# log-directory = Directory to log information to
# run-directory = Directory to put running state in
# cache-directory = Directory to cache to
# sessions-directory = Directory to find sessions
# remote-sessions-directory = Directory to find remote sessions
# greeters-directory = Directory to find greeters
# backup-logs = True to move add a .old suffix to old log files when opening new ones
# dbus-service = True if LightDM provides a D-Bus service to control it
#
[LightDM]
#start-default-seat=true
#greeter-user=lightdm
#minimum-display-number=0
#minimum-vt=7
#lock-memory=true
#user-authority-in-system-dir=false
#guest-account-script=guest-account
#logind-check-graphical=false
#log-directory=/var/log/lightdm
#run-directory=/var/run/lightdm
#cache-directory=/var/cache/lightdm
#sessions-directory=/usr/share/lightdm/sessions:/usr/share/xsessions:/usr/share/wayland-sessions
#remote-sessions-directory=/usr/share/lightdm/remote-sessions
#greeters-directory=$XDG_DATA_DIRS/lightdm/greeters:$XDG_DATA_DIRS/xgreeters
#backup-logs=true
#dbus-service=true

#
# Seat configuration
#
# Seat configuration is matched against the seat name glob in the section, for example:
# [Seat:*] matches all seats and is applied first.
# [Seat:seat0] matches the seat named "seat0".
# [Seat:seat-thin-client*] matches all seats that have names that start with "seat-thin-client".
#
# type = Seat type (local, xremote, unity)
# pam-service = PAM service to use for login
# pam-autologin-service = PAM service to use for autologin
# pam-greeter-service = PAM service to use for greeters
# xserver-backend = X backend to use (mir)
# xserver-command = X server command to run (can also contain arguments e.g. X -special-option)
# xmir-command = Xmir server command to run (can also contain arguments e.g. Xmir -special-option)
# xserver-config = Config file to pass to X server
# xserver-layout = Layout to pass to X server
# xserver-allow-tcp = True if TCP/IP connections are allowed to this X server
# xserver-share = True if the X server is shared for both greeter and session
# xserver-hostname = Hostname of X server (only for type=xremote)
# xserver-display-number = Display number of X server (only for type=xremote)
# xdmcp-manager = XDMCP manager to connect to (implies xserver-allow-tcp=true)
# xdmcp-port = XDMCP UDP/IP port to communicate on
# xdmcp-key = Authentication key to use for XDM-AUTHENTICATION-1 (stored in keys.conf)
# unity-compositor-command = Unity compositor command to run (can also contain arguments e.g. unity-system-compositor -special-option)
# unity-compositor-timeout = Number of seconds to wait for compositor to start
# greeter-session = Session to load for greeter
# greeter-hide-users = True to hide the user list
# greeter-allow-guest = True if the greeter should show a guest login option
# greeter-show-manual-login = True if the greeter should offer a manual login option
# greeter-show-remote-login = True if the greeter should offer a remote login option
# user-session = Session to load for users
# allow-user-switching = True if allowed to switch users
# allow-guest = True if guest login is allowed
# guest-session = Session to load for guests (overrides user-session)
# session-wrapper = Wrapper script to run session with
# greeter-wrapper = Wrapper script to run greeter with
# guest-wrapper = Wrapper script to run guest sessions with
# display-setup-script = Script to run when starting a greeter session (runs as root)
# display-stopped-script = Script to run after stopping the display server (runs as root)
# greeter-setup-script = Script to run when starting a greeter (runs as root)
# session-setup-script = Script to run when starting a user session (runs as root)
# session-cleanup-script = Script to run when quitting a user session (runs as root)
# autologin-guest = True to log in as guest by default
# autologin-user = User to log in with by default (overrides autologin-guest)
# autologin-user-timeout = Number of seconds to wait before loading default user
# autologin-session = Session to load for automatic login (overrides user-session)
# autologin-in-background = True if autologin session should not be immediately activated
# exit-on-failure = True if the daemon should exit if this seat fails
# fallback-test = Script to run to check if hardware can handle Wayland - should return 1 if so
# fallback-session = Session to launch if fallback-test returns 0
# fallback-greeter = Greeter session to launch if fallback-test returns 0
#
[Seat:*]
#type=local
#pam-service=lightdm
#pam-autologin-service=lightdm-autologin
#pam-greeter-service=lightdm-greeter
#xserver-backend=
#xserver-command=X
#xmir-command=Xmir
#xserver-config=
#xserver-layout=
#xserver-allow-tcp=false
#xserver-share=true
#xserver-hostname=
#xserver-display-number=
#xdmcp-manager=
#xdmcp-port=177
#xdmcp-key=
#unity-compositor-command=unity-system-compositor
#unity-compositor-timeout=60
greeter-session=pi-greeter
greeter-hide-users=false
#greeter-allow-guest=true
#greeter-show-manual-login=false
#greeter-show-remote-login=true
user-session=LXDE-pi-x
#allow-user-switching=true
#allow-guest=true
#guest-session=
#session-wrapper=lightdm-session
#greeter-wrapper=
#guest-wrapper=
display-setup-script=/usr/share/dispsetup.sh
#display-stopped-script=
#greeter-setup-script=
#session-setup-script=
#session-cleanup-script=
#autologin-guest=false
autologin-user=pi
#autologin-user-timeout=0
#autologin-in-background=false
autologin-session=LXDE-pi-x
#exit-on-failure=false
#fallback-test=
#fallback-session=
#fallback-greeter=

#
# XDMCP Server configuration
#
# enabled = True if XDMCP connections should be allowed
# port = UDP/IP port to listen for connections on
# listen-address = Host/address to listen for XDMCP connections (use all addresses if not present)
# key = Authentication key to use for XDM-AUTHENTICATION-1 or blank to not use authentication (stored in keys.conf)
# hostname = Hostname to report to XDMCP clients (defaults to system hostname if unset)
#
# The authentication key is a 56 bit DES key specified in hex as 0xnnnnnnnnnnnnnn.  Alternatively
# it can be a word and the first 7 characters are used as the key.
#
[XDMCPServer]
#enabled=false
#port=177
#listen-address=
#key=
#hostname=

#
# VNC Server configuration
#
# enabled = True if VNC connections should be allowed
# command = Command to run Xvnc server with
# port = TCP/IP port to listen for connections on
# listen-address = Host/address to listen for VNC connections (use all addresses if not present)
# width = Width of display to use
# height = Height of display to use
# depth = Color depth of display to use
#
[VNCServer]
#enabled=false
#command=Xvnc
#port=5900
#listen-address=
#width=1024
#height=768
#depth=8

non ya toujours le curseur

ça n’exite pas ces options lol

Effectivement, maintenant c’est plein écran
Par contre j’ai toujours le curseur et le scintillement

pi@raspberrypiFlipper:~ $ mplayer -nolirc -noquiet -slave -identify -fps 30 -vo fbdev2:/dev/fb1 -vf scale=480:-3 LW3Org.mp4 -nosound
MPlayer UNKNOWN-12 (C) 2000-2023 MPlayer Team

Playing LW3Org.mp4.
libavformat version 59.27.100 (external)
libavformat file format detected.
[mov,mp4,m4a,3gp,3g2,mj2 @ 0xb6637a58]Protocol name not provided, cannot determine if input is local or a network protocol, buffers and access patterns cannot be configured optimally without knowing the protocol
ID_VIDEO_ID=0
[lavf] stream 0: video (h264), -vid 0
ID_AUDIO_ID=0
[lavf] stream 1: audio (aac), -aid 0, -alang und
VIDEO:  [H264]  640x360  24bpp  29.970 fps  366.5 kbps (44.7 kbyte/s)
Opening video filter: [scale w=480 h=-3]
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
libavcodec version 59.37.100 (external)
[h264 @ 0xb5ddb3e8]Requested frame threading with a custom get_buffer2() implementation which is not marked as thread safe. This is not supported anymore, make your callback thread-safe.
Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264)
==========================================================================
ID_VIDEO_CODEC=ffh264
Clip info:
 major_brand: mp42
ID_CLIP_INFO_NAME0=major_brand
ID_CLIP_INFO_VALUE0=mp42
 minor_version: 0
ID_CLIP_INFO_NAME1=minor_version
ID_CLIP_INFO_VALUE1=0
 compatible_brands: isommp42
ID_CLIP_INFO_NAME2=compatible_brands
ID_CLIP_INFO_VALUE2=isommp42
 creation_time: 2018-11-21T02:24:27.000000Z
ID_CLIP_INFO_NAME3=creation_time
ID_CLIP_INFO_VALUE3=2018-11-21T02:24:27.000000Z
ID_CLIP_INFO_N=4
Load subtitles in ./
ID_FILENAME=LW3Org.mp4
ID_DEMUXER=lavfpref
ID_VIDEO_FORMAT=H264
ID_VIDEO_BITRATE=366488
ID_VIDEO_WIDTH=640
ID_VIDEO_HEIGHT=360
ID_VIDEO_FPS=30.000
ID_VIDEO_ASPECT=0.0000
ID_START_TIME=0.00
ID_LENGTH=236.01
ID_SEEKABLE=1
ID_CHAPTERS=0
Audio: no sound
FPS forced to be 30.000  (ftime: 0.033).
Starting playback...
Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
ID_VIDEO_ASPECT=1.7778
[swscaler @ 0xb66d6358]bicubic scaler, from yuv420p to rgb565le using C
VO: [fbdev2] 480x270 => 480x270 BGR 16-bit
^C   5.2 155/155 92% 211%  0.0% 0 0


MPlayer interrupted by signal 2 in module: av_sync
ID_SIGNAL=25/155 92% 211%  0.0% 0 0

Exiting... (Quit)
ID_EXIT=QUIT
pi@raspberrypiFlipper:~ $

@farias exactement celle que tu m’as donné

J’ai du installer lshw.
Quand je lance la commande, à l’affichage, j’ai
PCI (sysfs)
USB
mais USB vient s’écrire sur PCI (sysfs)

puis ensuite :

pi@raspberrypiFlipper:~ $ sudo lshw
raspberrypiflipper
    description: ARMv6-compatible processor rev 7 (v6l)
    product: Raspberry Pi Zero W Rev 1.1
    serial: 00000000d1622f06
    width: 32 bits
  *-core
       description: Motherboard
       physical id: 0
     *-cpu
          description: CPU
          product: cpu
          physical id: 0
          bus info: cpu@0
          size: 1GHz
          capacity: 1GHz
          capabilities: half thumb fastmult vfp edsp java tls cpufreq
        *-cache
             description: L1 Cache
             physical id: 0
             size: 16KiB
     *-memory
          description: System memory
          physical id: 1
          size: 427MiB
  *-usbhost
       product: DWC OTG Controller
       vendor: Linux 6.12.43+ dwc_otg_hcd
       physical id: 1
       bus info: usb@1
       logical name: usb1
       version: 6.12
       capabilities: usb-2.00
       configuration: driver=hub slots=1 speed=480Mbit/s
  *-mmc0
       description: MMC Host
       physical id: 2
       logical name: mmc0
     *-device
          description: SD Card
          product: SD64G
          vendor: Unknown (39)
          physical id: 5048
          logical name: /dev/mmcblk0
          version: 6.0
          date: 03/2021
          serial: 26164439
          size: 56GiB (60GB)
          capabilities: sd partitioned partitioned:dos
          configuration: logicalsectorsize=512 sectorsize=512 signature=324e7c1b
        *-volume:0
             description: Windows FAT volume
             vendor: mkfs.fat
             physical id: 1
             logical name: /dev/mmcblk0p1
             logical name: /boot/firmware
             version: FAT32
             serial: 0512-6085
             size: 503MiB
             capacity: 512MiB
             capabilities: primary fat initialized
             configuration: FATs=2 filesystem=fat label=bootfs mount.fstype=vfat mount.options=rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro state=mounted
        *-volume:1
             description: EXT4 volume
             vendor: Linux
             physical id: 2
             logical name: /dev/mmcblk0p2
             logical name: /
             version: 1.0
             serial: bbd12f80-9a62-4baf-b67b-c7ece572d713
             size: 56GiB
             capacity: 56GiB
             capabilities: primary journaled extended_attributes large_files dir_nlink recover extents ext4 ext2 initialized
             configuration: created=2025-05-13 02:20:33 filesystem=ext4 label=rootfs lastmountpoint=/ modified=2025-08-29 09:12:58 mount.fstype=ext4 mount.options=rw,noatime mounted=2025-08-28 19:17:02 state=mounted
  *-mmc1
       description: MMC Host
       physical id: 3
       logical name: mmc1
     *-device
          description: SDIO Device
          physical id: 1
          bus info: mmc@1:0001
          serial: 0
          capabilities: sdio
        *-interface:0
             description: Wireless interface
             product: 43430
             vendor: Broadcom
             physical id: 1
             bus info: mmc@1:0001:1
             logical name: mmc1:0001:1
             logical name: wlan0
             serial: b8:27:eb:37:7a:53
             capabilities: ethernet physical wireless
             configuration: broadcast=yes driver=brcmfmac driverversion=7.45.98 firmware=01-8e14b897 ip=192.168.1.16 multicast=yes wireless=IEEE 802.11
        *-interface:1
             product: 43430
             vendor: Broadcom
             physical id: 2
             bus info: mmc@1:0001:2
             logical name: mmc1:0001:2
  *-sound
       description: b1
       physical id: 4
       logical name: card0
       logical name: /dev/snd/controlC0
       logical name: /dev/snd/pcmC0D0p
       logical name: /dev/snd/pcmC0D1p
  *-graphics:0
       product: BCM2708 FB
       physical id: 5
       logical name: /dev/fb0
       capabilities: fb
       configuration: depth=32 resolution=480,320
  *-graphics:1
       product: fb_ili9486
       physical id: 6
       logical name: /dev/fb1
       capabilities: fb
       configuration: depth=16 resolution=480,320
  *-input
       product: ADS7846 Touchscreen
       physical id: 7
       logical name: input0
       logical name: /dev/input/event0
       logical name: /dev/input/mouse0
       capabilities: spi
pi@raspberrypiFlipper:~ $

@farias a dit dans MAJ Raspberry PI Zero W :

mplayer -nolirc -noquiet -slave -identify -fps 30 -vo fbdev2:/dev/fb1 -vf scale=240:-3 BigBuckBunny_320x180.mp4 -nosound
0

farias
Tu as le fichier de configuration de mplayer de l’ancien pour comparer avec celui-ci ?
Je crois que c’est sous /etc/mplayer/ .

La vidéo s’affiche sur l’écran mais

• elle n’est pas en plein écran
• j’ai un curseur en haut à gauche de l’écran
• j’ai un scintillement énorme. Je t’envoie une vidéo